On May 30 was the launch of a new alliance: Pharma Delta. The Pharma Delta alliance aims to set a new standard for pharmaceutical excellence and collective progress. Representatives from small and large pharmaceutical companies, academic institutions, educational organizations and local governments work together to focus on accelerating innovation, strengthening careers, and creating shared sustainable facilities.

Pharma Delta intends to create an ecosystem that enhances and accelerates the entire pharmaceutical chain. Pharma Delta aims not just for an increase in jobs, but for full careers and it believes in the development and retention of staff, which is vital for the growth and prosperity of our region.

The launch took place during the From Molecule to Business network event on May 30 at Pivot Park. The official launch was performed by chair Rob Nelissen, Organon Central Northern Europe and Frank den Brok, Gemeente Oss and Harmen Neidig, HAN University of Applied Sciences.

Together we boost pharma and empower careers!

Op de mooiste trouwlocatie van Gelderland en de 3e mooiste van Nederland deden we opnieuw een poging om een goed ‘huwelijk’ tussen de aanwezige angels en de pitchende ondernemers te sluiten. Of dat gelukt is weten we nog niet.

Arjan Stuij van BANN partner Poelmann van den Broek leidde ons soepel door het plenaire programma. Sven Bakkes van LUMO Labs informeerde ons over de mogelijkheden, do’s en don’ts van het investeren in AI proposities. En ondanks de regen konden we fijn netwerken en heerlijk eten onder de stretchtent op de binnenplaats van het slot.

Pitches
De volgende ondernemers hebben gepitcht tijdens deze bijeenkomst:

  • Milo Kleijnjan, Aidyn
  • Mischa Masthoff, wijcontrolerenjedata.nl
  • Bob Klein Lankhorst, HAL24K-Agri
  • Yama Akbari, Medivox

Met groot verdriet delen wij het nieuws dat Martijn Kriens op 27 mei is overleden aan de gevolgen van zijn ziekte.

Martijn stond midden in het leven, altijd vol energie en passie voor zijn werk. De laatste jaren van zijn werkzame leven was hij enorm betrokken bij Briskr. Hij was niet alleen een toegewijde professional, maar ook iemand met een hart vol dromen en een hoofd vol ideeën die hij graag wilde verwezenlijken, zowel zakelijk als privé. Zijn gedrevenheid en enthousiasme waren inspirerend voor velen om hem heen.

Martijn zal herinnerd worden om de sprankeling in zijn ogen, zijn warme glimlach en onvermoeibare inzet voor alles wat hij deed. Om het goede glas wijn in zijn hand, zijn liefde voor zijn Saab cabrio, zijn bourgondische levenswijze. Om de paradijsvogel die hij was. We missen hem enorm.

Zie de kaart als een uitnodiging om aanwezig te zijn bij de afscheidsdienst van Martijn. En voel je vrij deze te delen met je collega’s die Martijn ook hebben gekend.

Klik op deze link voor de kaart.

Rust zacht, Martijn. Je leeft voort in onze herinneringen en in ons hart.

Bas, Floor, Linda, Marieke, Marion & Martijn S.

In manufacturing, quality is essential and projects need to be done right the first time. The engineering component in such projects is both complex and time-consuming. According to the founders of EnginX, there are more efficient ways of working. CEO Saskia Eijkelhof talks about their innovative software to tackle technical design struggles.

No matter how complex an engineering project, it always starts with a technical drawing. It is also where the challenges arise that EnginX solves. Saskia tells: “The first technical drawing is incredibly complex. It has to be absolutely right in terms of physics and mathematics. Because obviously, you don’t want to develop and deliver a hydrogen system and then discover it doesn’t work, or worse: it explodes. It’s a process with many mandatory checks and iterations and it’s very time-consuming. It is necessary to be meticulous, but we are sure we can improve the process.”

Design, populate and simulate

EnginX’s software allows engineers to make technical designs that are responsive. And instead of solely using industry icons and then searching for the right part, you can create drawings and populate them with real components. “It allows you to simulate and calculate directly from the drawing, making finding suitable components much quicker and easier. There is no search engine for a pump with a specific diameter and flow rate. So until now, engineers have had to call manufacturers and suppliers for details. Or they had to flip through paper catalogues and compare and convert metrics and compare data —an incredibly tedious and time-consuming process.”

Saskia first heard about EnginX through Mercator Launch. “I was immediately drawn to the technical challenge they were wanting to solve. I have never engineered myself, but having worked in manufacturing environments, I recognize the struggles. Especially when customers come up with additional requirements during a project, I could see engineers implode as they knew they had to recalculate every component in the whole system.”

In 2016, EnginX was established by three founders from different engineering backgrounds: aviation, the oil and gas industry and astrophysics. They all had one thing in common: they wanted to improve and modernize the outdated and time-consuming way of working in engineering. The first step was to update the design process itself.

“This resulted in a powerful product and the next step was to write a conclusive business plan”, explains Saskia. “Thomas Bronzwaer participated in two Mercator Launch IMPROVE programs to get the necessary support. And this is where we got to know each other. I joined EnginX not long after. After two years, the board asked me if I wanted to take over as CEO, allowing Thomas to focus fully on the technical side as CTO.”

Steps in growth

The product worked well, so the next step was figuring out how to market it. It takes more than showing off your self-written code to convince potential buyers. However, when pitching, EnginX noticed a growing interest in the product. “When I became CEO, I immediately started looking for financing instruments, such as the Startup Fonds Gelderland, OostNL and the Business Angels Network Nijmegen. We were able to join through Briskr. Having money at hand makes life a lot easier! We can start planning for the future.”

Twelve people now work at EnginX. “I wouldn’t call us a scale-up just yet, but we are getting there! Our growth has taken off. We are happy we can count on support from Mercator Launch, OostNL and Briskr for their network, knowledge and partners. The ecosystem these organizations have built up in Nijmegen and beyond is amazing.”

A household name

Having taken the first steps, EnginX can now look forward. “We want to be a household name for engineers. In fact, with our software, we could do even more to tackle early-phase engineering problems. From energy efficiency and 3D geometry to maintenance and project planning; we want to contribute to it all.”

The company focuses on storming the Dutch market. “We joined the Verenigde Maakindustrie Oost-Nederland (VMO), with 200 affiliated manufacturers in the east of the Netherlands and the GMV with affiliated manufacturers in the food production industry to both understand our market and be able to converse with potential users. And why look abroad for customers when there is still so much to solve in the Netherlands?” According to Saskia.

MindAffect, a Netherlands-based healthtech startup, has raised €1.1mn to bring its hearing diagnostics technology to market.

A spinout from Radboud University, MindAffect has developed a patented brain computer interface (BCI) technology, which enables diagnosis of hearing impairments using brain signals.

MindAffect aims to provide a more equitable testing solution that specifically caters for hard-to-test patients, such as children, the elderly, and people with disabilities.

Current methods, such as pure-tone or speech testing, depend on the constant responses of patients. But this can be challenging or ineffective for individuals who are unable to communicate due to age or disability — resulting in underdiagnosis.

Unaddressed hearing impairments can have serious consequences for both patients and the society, from mental health issues to high healthcare costs

“Hearing loss profoundly impacts every facet of life,” MindAffect’s CEO Jennifer Goodall said in a statement.

“For children, this means risks of poor educational and social development; for the elderly, increased isolation and a greater risk of early dementia; and the disabled, fewer opportunities for social inclusion.”

A new hearing diagnostics system

To tackle this issue, MindAffect has combined neuroscience, BCI technology, and AI to develop Aurora, a response-free hearing diagnostics system, which relies on brain stimuli and signals.

Aurora uses a headband that patients wear while listening to soft chirps and watching a silent video for less than 10 minutes. The system reads the brain signals and combines the information with air conduction and bone conduction audiometric threshold tests to make the diagnosis.

MindAffect expects to launch Aurora next year. The company is also working on vision diagnostics for children as well as a solution to monitor work-related stress in demanding visual or auditory environments.

Existing and new investors backed the funding round, including the NLC Health Impact Fund, Barco Limpo, and Wasteland Investments.

Source: Dutch startup to test hearing via brain-computer interface (thenextweb.com)

Diagnostic accuracy is at the basis of determining the value of a diagnostic test. However, the value of a test depends on many factors such as the exact population and the workflow of the hospital in which it is used. These factors differ between contexts in which the test is used.

Look back this webinar “The value of diagnostics in Urology: Beyond diagnostic accuracy”. In this webinar, Medip Analytics will discuss the latest views on value assessments in diagnostics with a focus on cost-effectiveness analyses. You can find the recording on the website of Medip Analytics.

Speakers: Tim Govers, PhD & Maarten de Rooij, MD PhD

The techniques used in electrophysiology are old school, especially when looking into the animal brain. The new technique uses tiny electrodes, which are a quart of the width of a human hair. Those electrodes are an order of magnitude better than the old ways, but also very, very expensive. And prone to breaking. 3Dneuro fixes that problem with their new hardware. We discuss this with CTO Tim Schröder.

Doing research with needle-thin electrodes that are hard to find and also very expensive. “Quite stressful!”, says Tim. “Something had to change. The old technique is like taking pictures with your 1990s Nokia: it works, and it’s impossible to break, but the pictures are bad. The new technique is like using the latest iPhone instead to take a photograph. Beautiful. But if you drop it, there is a risk that your brand new €1000 device breaks, even after taking just one picture. Our brain implant is like a military-grade phone case: it protects the electrodes. That way, we make brain experiments cheaper, easier and more efficient.”

Between science and production   

As a company, 3Dneuro strikes a balance between scientific research and production. The three founders, Abdel Nemri, Martha Havenith and Tim Schröder, are close to the research field. “We are a mix of hardware production and R&D. When we started 3Dneuro in 2017, we were all still working full-time at our universities. We did this on purpose and built the company up on the side. That way, we could make a name for ourselves while still maintaining our connection with the academic world. The switch to working full time for 3Dneuro was quite organic, in the end!”

The company started as a spin-off from the Radboud University, with the help of incubator Mercator Launch. “Getting up and running was difficult, but we knew it would be. Animal experimenting is a difficult field after all, both politically and socially. In a perfect world, they would not be necessary. But, at this point in time, these experiments are still absolutely necessary to advance science and will be for some decades. Therefore, our aim is to make them as efficient as possible. With the best methods, fewer animals are needed to get the results we need.”

3Dneuro works for the academic market. A second challenge which Tim saw coming. “It is a small and slow market. You have to show laboratories exactly why you’re the best solution before they want to do business with you because switching your procedures can cost thousands of euros. That’s why starting out part-time was a good idea: we were able to slowly build trust within the market.”

The 5-year mark

A third challenge came more unexpected: the decrease in funding. “As our company approached the 5-year mark, we saw that funding for start-ups stopped. With the right funding, we were able to scale things up. But without it, we were forced to become more marketable. Our approach of growing slowly wasn’t viable anymore.”

However, 3Dneuro was still able to make the transition. “We’re slowly becoming an established name. The brain implants we make are sold to 75 labs worldwide. From US universities to Nobel prize winners. And finally, we are seeing returning customers because they are working properly with our implants. We are also about to launch our second product, which is not an implant. It enables VR research on animals. Until now it was impossible to do VR research on rats. But together with Nelson Totah, a researcher in Helsinki, we made it work.”

Part of this change came through Mercator Launch. “I heard about Briskr through the incubator. I saw that Briskr was hosting seminars, and I started attending them. From business valuation to pitching and everything in between: I learned a lot! It is nice to be exposed to other companies and the ecosystem in Nijmegen. The Noviotech Campus is a good place for us to be, and it never hurts to broaden your horizons. For me personally, the BANN was great. As CTO, I don’t pitch that often. This was my chance to pitch 3Dneuro outside of the purely scientific world.”

Goals and dreams

After Covid Tim no longer answers the ‘where do you see yourself in 5 years’ question, but 3Dneuro’s goals are clear. “We want to establish our brain implants further and make it easier for researchers to carry out their experiments more easily. All this is driven by a bigger dream: we simply don’t know enough about the brain to solve all our issues yet. We want to know more, essentially everything, about the brain! By studying the brain better, you can unlock that knowledge. Our implants help scientists study the brain better, faster and cheaper.”

Bedrijven in de medtech, ehealth en hightech hebben grote interesse om de Duitse markt te betreden. Tijdens het event Scaling to Germany – expand your health innovation in Nijmegen vertelde Frank Speer van Business Metropole Ruhr welke contacten cruciaal zijn voor succes bij de oosterburen.

Opschalen naar Duitsland wordt door veel jonge bedrijven in Nederland als serieuze optie onderzocht. Daarom organiseerde Briskr op 20 maart Scaling to Germany – expand your health innovation in Nijmegen.

De reden is eenvoudig. Wanneer Nederlandse startups succesvol zijn, lopen ze al snel tegen de grenzen van hun eigen land aan, concludeert Techleap in het The State of Dutch Tech 2023 Report. Om de groei door te zetten, is meer kapitaal en een grotere markt nodig. “En dan wordt de stap naar Duitsland plotseling interessant”, aldus manager internationalisering Frank Speer van Business Metropole Ruhr (BMR).

Nederlanders ontdekken het Ruhrgebied

Speer was een van de sprekers tijdens het evenement in Nijmegen waar 25 health-ondernemers op af kwamen. Hij merkt hoe de interesse in Duitsland van Nederlandse bedrijven toeneemt. Zo sprak hij op verschillende events in Nederland en ontving hij afgelopen jaar een health-delegatie uit de regio Arnhem-Nijmegen in het Ruhrgebied.

Toch staat het Ruhrgebied nog niet bij iedereen op de radar, merkt Speer. Hij wijst erop dat wanneer je een cirkel van 100 kilometer trekt rond Arnhem en Nijmegen, je binnen 1 uur 10 miljoen mensen kunt bereiken. “En 5 miljoen mensen hiervan wonen in Duitsland. Het Ruhrgebied is vanuit Nijmegen dichterbij dan Amsterdam.”

En als Nederlanders zaken willen doen in Duitsland, dan rijden ze vaak aan het Ruhrgebied voorbij, merkt hij. “Dan gaan ze naar München, Hamburg of Berlijn, terwijl de echte kansen gewoon hier om de hoek in Essen, Düsseldorf of Bochum liggen.”

De manager internationalisering van Business Metropole Ruhr zegt dat niet zomaar omdat hij graag voor eigen parochie preekt. “We hebben vergeleken met de rest van Duitsland een excellente gezondheidszorg. Het Ruhrgebied heeft de hoogste dichtheid van ziekenhuizen van het land. Het gaat om 90 klinieken met in totaal 39.000 bedden.”

Ondersteuning bij het vinden van de juiste contacten in Duitsland

Op het event bij Briskr kreeg Speer goede vragen, zegt hij. “Veel vragen gingen over hoe het Duitse zorgsysteem in elkaar zit. Welke stakeholders zijn belangrijk om jouw product of dienst te laten slagen?”

Wat duidelijk werd tijdens de bijeenkomst is dat je als Nederlands bedrijf warme contacten nodig hebt. “Naast het kennen van de stakeholders moet je ook weten welke opinieleiders je in jouw branche voor je moet zien te winnen. Als BMR hebben we veel ervaring in het leggen van de juiste contacten.”

Dat kon de volgende spreker Floor Waardenburg als CEO van Cue2Walk International bevestigen. Zijn bedrijf wordt door BMR begeleid bij het betreden van de Duitse markt. “Ze waren vorig jaar mee met een Nederlandse scale-updelegatie naar het Ruhrgebied”, vertelt Speer. “Later hebben we hen individueel meegenomen naar strategische contacten in Bochum en Bottrop. Inmiddels hebben ze een pilotproject gestart met een kliniek in Essen. Zo hebben we dankzij onze netwerken heel snel samen stappen kunnen zetten. Zijn verhaal geeft ook de andere Nederlandse bedrijven moed.”

Aanbod Nederlandse healthbedrijven past goed bij de vraag in Duitsland

Daarbij past de vraag vanuit het Ruhrgebied erg goed bij het aanbod van Nederlandse healthbedrijven, zegt Speer. “Qua innovatie in de zorg loopt Nederland over het algemeen enkele jaren voor op Duitsland. Dan komt het erg goed uit dat juist in het Ruhrgebied men erg open staat voor deze nieuwe oplossingen.”

Volgende events:

  • 11 april: webinar ‘Scaling to Germany’ georganiseerd door Business Metropole Ruhr en Dutch Basecamp. Aanmelden: https://dutchbasecamps.typeform.com/to/GcYzenVF?typeform
  • 27 en 28 mei: ruhrSUMMIT in Bochum, het grootste regionale innovatie- en start-up-evenement. De RVO en het Nederlandse Consulaat-Generaal Düsseldorf organiseren hier een Nederlands paviljoen. BMR organiseert op 27 mei een speciale ijsbreker voor Nederlandse en andere internationale bezoekers. https://ruhrsummit.de/en/
  • 19-21 juni: BMR organiseert een pre-event op “The Next Web” conferentie in Amsterdam en heeft een stand op het evenement

Met een knapperig haardvuur op de achtergrond, zijn we in de prachtige Ridderzaal van Slot Doddendael gestart met het plenaire programma. Sjoerd Klabbers van BANN partner BDO leidde ons vervolgens soepel door de presentaties en pitch video’s.

De spreker was Ton Rosendaal van Whizzdom.Ton is één van onze leden en een ervaren angel investor. Hij vertelde over zijn praktijkervaringen met RVO’s Seed Business Angel regeling. Aan de hand van zijn eigen investeringen gaf hij ook toelichting over de voor-en nadelen van deze “Verdubbelaar op je eigen investeringskapitaal”. Meer informatie vind je via deze link. En klik hier voor de slide deck van Ton.

Vervolgens konden we kijken naar 4 nieuwe pitch video’s en volgden de rondetafel sessie’s waarbij angels en partners vragen konden stellen en pitchers (+ team) meer informatie konden geven over hun propositie. We sloten af met wederom een heerlijk culinair walking dinner met 5 gangen.

Pitchende startups
De volgende ondernemers hebben gepitcht tijdens deze bijeenkomst:

  • Bas-Jan Hoogenberg, Bondus
  • Pieter van Weijen, inn4cure
  • Peter Deen, Streasure4Health
  • Desiree van Maasakker, Let’s Zoip

When you hear the words ‘cocktail party’, all sorts of positive associations will probably start firing up in your brain. Unfortunately, not all of us feel this way. For people who suffer from hearing difficulties, the so-called Cocktail Party Problem, surrounding sounds blend into one big blur, making it very difficult to distinguish each individual sound and its source from other sounds. By looking at the way bees move their ears and perceive sound, startup BeephoniX may just have found a solution, says CEO Klaas-Jan Kakebeeke.

The bee’s knees

The inspiration came a couple of years ago when Martijn Agterberg, associate professor at Radboud University and audiologist, visited a beekeeper’s lecture. “There, he learnt that bees use their antennas as moveable ears, which enables them to trace the source of a sound”, explains Klaas-Jan. “Based on this mechanism, Martijn and technical engineer Patrick Wijnings developed a dynamic microphone that rotates and can determine the source of a sound.”

The Cocktail Party Problem can turn into a harmful problem. Despite all efforts from the industry,  current hearing devices amplify all sounds and are not yet solving the problem. Because of this, people who wear them tend to avoid busy and noisy environments and larger groups, because they are unable to hear what others are saying. Not only does this increase the amount of stress put on the ear, but it also leads to uncomfortable feelings, and potentially, social isolation. This is a major problem, and an innovation that can solve this problem is important”, according to Klaas-Jan.

BeephoniX’s innovation may prove to be interesting for people who experience the Cocktail Party Problem. “According to the World Health Organisation, by 2050, one in four people will suffer from hearing problems to some extent. By placing our microphone into hearing aids, conversations will be easier in noisy situations.”

So, how does the innovation work? “Our technology consists of a moving microphone. When a speaker is talking from the direction of the movement, the microphone causes a Doppler effect. When a speaker is talking from the other direction, no Doppler effect occurs. This means that we can localise the position of the sound source by measuring the strength of the Doppler effects.”

Taking off

Klaas-Jan and Patrick joined the BeephoniX team a little over a year ago. They participated in the NWO Venture Challenge, where their idea earned them a respectable second place. They also received a take-off 2 loan from NWO of 250.000 euros, and additional funding of 190.000 euros. This paved the way for other collaborations.

BeephoniX’s prototype, the Beepod, has already gathered much interest from organisations such as the Ministry of Defence, which has offered BeephoniX a grant and wants to use the technology to detect drones. “We’re also talking to Holland Health and an Austrian company, who were blown away by our prototype. Currently, we’re working on version 2.0.”

Klaas-Jan: “Of course, our collaboration with Briskr has been great. When you are a startup in the world of health and high tech, investors can have trouble seeing the long-term goal. You often need a lot of investments. Briskr introduced us to promising business angels and continues to support us with services such as workshops and business valuation.”

Flying high

BeephoniX’s goal is clear, says Klaas-Jan. “Solving the Cocktail Party Problem, of course! If we succeed, we have realised something beautiful. We’ve gathered the first critical funding, and now we need to make sure we keep up the pace and realise our ambitious goal.”

“It would be fantastic if our microphone ends up in hearing devices. We’re very excited to see where the journey takes us.”